New insights into the mechanism of wettability alteration during low salinity water flooding in carbonate rocks

There is not a consistent view about the mechanism of wettability alteration during low salinity water flooding. This paper highlights extensive wettability studies to investigate the wettability alteration on mineralogically different carbonates. Contact angle measurements were conducted to characterize wettability changes quantitatively. The results clearly revealed that wettability of carbonate rock surfaces can be altered to a more water-wet condition by lowering water salinity. The trend of the maximum change of contact angle (MCCA) variation with dolomite/calcite content in the rock is fairly linear under the same salinity, which demonstrates that carbonate minerals can affect rock wettability in a way. Also, the higher calcite content in the rock, the greater MCCA, i.e. the stronger effect of LSWF. Besides, the sensitivity of rock wettability to minerals is different under different salinity conditions. When the salinity is in the range of 2384.6?～?4769.2?mg/L, rock wettability is most sensitive to minerals. The analysis of the effect of ion composition showed that the effect of Ca²⁺ on wettability alteration is greater than that of Mg²⁺ at room temperature, and with the increase of the content of calcite in the rock, the effect of Ca²⁺ is more pronounced than that of Mg²⁺.     

First-principles study of metal-semiconductor contact between MX2 (M = Nb,Pt; X = S,Se) monolayers

First principles calculations are performed to investigate the structural and electronic properties of MX₂ (M = Nb, Pt; X = S, Se) monolayers and their van der Waals (vdW) heterostructures. The dynamical stability of monolayers and vdW heterostructures is confirmed by binding energy and phonon spectra. An indirect band gap nature is found for PtS₂ and PtSe₂ monolayers while NbS₂, NbSe₂ and all vdW heterostructures are metals. The intrinsic electronic properties of both NbX₂ and PtX₂ are well preserved due to weak vdW contact. It is demonstrated that a p-type Schottky contact with a small barrier height is formed at NbX₂-PtX₂ interface. The zero tunnel barrier and higher potential drop across the interface in these contacts imply large transfer of charge carriers across the interface, making them potential candidates in nanoelectronic device applications.     

铜铟镓硒薄膜太阳能电池新型图形化透明前电极研究

为了优化铜铟镓硒薄膜太阳能电池的前电极,提高铜铟镓硒薄膜太阳能电池的效率,提出了一种可应用于铜铟镓硒薄膜太阳能电池的AZO/图案化Ag薄膜/AZO结构的前电极,中间层的Ag薄膜与电池顶层的金属栅线具有完全相同的图案和尺寸,并且位于金属栅线的正下方,这种新型结构可以提高电池前电极的电学性能,但对电池来说不会带来额外的光学损失。对比了新型前电极结构与几种传统前电极的电学和光学性能,并且制备了相应的电池进行了性能对比。实验结果表明,新型的前电极结构可以提高铜铟镓硒薄膜太阳能电池的短路电流,相对传统AZO电极,电池效率从13. 83%提高到14. 53%。本结构可以明显提高电池效率。     

石墨烯与金属的欧姆接触理论研究

石墨烯材料应用于多种电子器件时不可避免地要与金属电极接触,它们之间的接触电阻直接影响了器件的性能.为了揭示影响金属电极与石墨烯间接触电阻的因素,提出有效地抑制这些影响的措施,本文建立了一种求解接触电阻的物理模型,将载流子的输运分为金属与正下方石墨烯之间、正下方石墨烯与邻近石墨烯之间的两个过程,分别研究各个过程的输运概率;结合金属电极与石墨烯接触对载流子分布的影响分析接触电阻,据此分别探讨了金属电极材料、栅极电压、掺杂浓度、金属与石墨烯原子距离等对接触电阻的影响.为验证理论分析结果的正确性,制作了金与石墨烯接触的实验样品,实验测得的接触电阻与理论分析结果符合.理论分析结果表明,可通过选择与石墨烯功函数接近的金属材料,降低二氧化硅层厚度,增加载流子平均自由程,改进金属材料的表面形态使其更光滑,减小金属与石墨烯耦合长度等方法降低石墨烯与金属电极的接触电阻.     

Investigation on nonlinear multi-scale effects of unsteady flow in hydraulic fractured horizontal shale gas wells

A unified mathematical model is established to simulate the nonlinear unsteady percolation of shale gas with the consideration of the nonlinear multi-scale effects such as slippage, diffusion, and desorption. The continuous inhomogeneous models of equivalent porosity and permeability are proposed for the whole shale gas reservoir including the hydraulic fracture, the micro-fracture, and the matrix regions. The corresponding semi-analytical method is developed by transforming the nonlinear partial differential governing equation into the integral equation and the numerical discretization. The non-linear multi-scale effects of slippage and diffusion and the pressure dependent effect of desorption on the shale gas production are investigated.     

氢退火的BZO前电极对非晶硅薄膜太阳能电池性能的影响

采用低压化学气相沉积方法在玻璃衬底上制备了B掺杂的ZnO（BZO）薄膜,通过氢退火对BZO进行处理,然后作为前电极进行了非晶硅薄膜太阳能电池的制备及性能研究。结果表明：在氢气气氛下退火后,BZO薄膜的载流子浓度基本无变化,但Hall迁移率显著提高,这使得BZO薄膜的导电能力提高;当采用厚度较小、透光率较高的BZO薄膜进行氢退火后作为前电极结构时,非晶硅薄膜太阳能电池的短路电流密度提高0.3~0.4 mA/cm²,电池的转化效率提高0.2%。实验结果可为通过优化前电极结构来提高非晶硅薄膜太阳能电池转化效率提供一种简易的方法。     

A new nonlinear force model to replace the Hertzian contact model in a rigid-rotor ball bearing system

A new nonlinear force model based on experimental data is proposed to replace the classical Hertzian contact model to solve the fractional index nonlinearity in a ball bearing system. Firstly, the radial force and the radial deformation are measured by statics experiments, and the data are fitted respectively by using the Hertzian contact model and the cubic polynomial model. Then, the two models are compared with the approximation formula appearing in Aeroengine Design Manual. In consequence, the two models are equivalent in an allowable deformation range. After that, the relationship of contact force and contact deformation for single rolling element between the races is calculated based on statics equilibrium to obtain the two kinds of nonlinear dynamic models in a rigid-rotor ball bearing system. Finally, the displacement response and frequency spectrum for the two system models are compared quantitatively at different rotational speeds, and then the structures of frequency-amplitude curves over a wide speed range are compared qualitatively under different levels of radial clearance, amplitude of excitation, and mass of supporting rotor. The results demonstrate that the cubic polynomial model can take place of the Hertzian contact model in a range of deformation.     

Comparative study of two lattice Boltzmann multiphase models for simulating wetting phenomena: implementing static contact angles based on the geometric formulation

Wetting phenomena are widespread in nature and industrial applications. In general, systems concerning wetting phenomena are typical multicomponent/multiphase complex fluid systems. Simulating the behavior of such systems is important to both scientific research and practical applications. It is challenging due to the complexity of the phenomena and difficulties in choosing an appropriate numerical method. To provide some detailed guidelines for selecting a suitable multiphase lattice Boltzmann model, two kinds of lattice Boltzmann multiphase models, the modified S-C model and the H-C-Z model, are used in this paper to investigate the static contact angle on solid surfaces with different wettability combined with the geometric formulation (Ding, H. and Spelt, P. D. M. Wetting condition in diffuse interface simulations of contact line motion. Physical Review E, 75(4), 046708 (2007)). The specific characteristics and computational performance of these two lattice Boltzmann method (LBM) multiphase models are analyzed including relationship between surface tension and the control parameters, the achievable range of the static contact angle, the maximum magnitude of the spurious currents (MMSC), and most importantly, the convergence rate of the two models on simulating the static contact angle. The results show that a wide range of static contact angles from wetting to non-wetting can be realized for both models. MMSC mainly depends on the surface tension. With the numerical parameters used in this work, the maximum magnitudes of the spurious currents of the two models are on the same order of magnitude. MMSC of the S-C model is universally larger than that of the H-C-Z model. The convergence rate of the S-C model is much faster than that of the H-C-Z model. The major foci in this work are the frequently-omitted important details in simulating wetting phenomena. Thus, the major findings in this work can provide suggestions for simulating wetting phenomena with LBM multiphase models along with the geometric formulation.     

离子液体分散液液微萃取-超高效液相色谱-串联质谱法测定食品接触材料中全氟辛酸和全氟辛烷磺酸的迁移量

建立了一种基于离子液体分散液液微萃取前处理技术的食品接触材料中全氟辛酸和全氟辛烷磺酸迁移量的超高效液相色谱-串联质谱测定方法。水、10%（体积分数）乙醇溶液和4%（体积分数）乙酸溶液作为3种水性食品模拟物与食品接触材料充分接触,进行迁移试验,对迁移液采用离子液体分散液液微萃取技术进行目标物的萃取富集,考察了萃取剂种类和用量、涡旋时间、盐浓度、离心速率及时间等关键因素对食品模拟物中全氟辛酸和全氟辛烷磺酸萃取效率的影响。使用Waters ACQUITY UPLC BEH Shield RP18色谱柱（50 mm×2.1 mm,1.7 μm）,以乙腈和水为流动相,梯度洗脱分离,在电喷雾负离子模式下,采用多反应监测模式进行定性及定量分析。结果表明,全氟辛酸和全氟辛烷磺酸在各自范围内线性关系良好（r²>0.99）,检出限分别为0.5和1 μg/L,定量限分别为2和5 μg/L;在低、中、高3个添加水平下全氟辛酸和全氟辛烷磺酸的平均回收率为86.4%~116.9%,相对标准偏差为4.3%~14.4%（n=6）。该方法准确高效、环境友好,适用于食品接触材料中全氟辛酸和全氟辛烷磺酸迁移量的检测。     

考虑等效曲率的超二次曲面单元非线性接触模型

基于连续函数包络的超二次曲面单元可有效地描述自然界和工业生产中的非球体颗粒形态, 并通过非线性迭代方法精确计算单元间的接触力. 对于具有复杂几何形态的超二次曲面单元, 线性接触模型不能准确地计算不同接触模式下的作用力. 考虑超二次曲面单元相互作用时不同颗粒形状及表面曲率的影响, 本文发展了相应的非线性黏弹性接触模型. 该模型将不同接触模式下的法向刚度和黏滞力统一表述为单元间局部接触点处等效曲率半径的函数; 切向接触作用则借鉴基于Mohr-Coulomb摩擦定律的球体单元非线性接触模型的计算方法. 为检验超二次曲面单元接触模型的可靠性, 对球形颗粒间的法向碰撞、椭球体颗粒间的斜冲击过程、圆柱体的静态堆积和椭球体的动态卸料过程进行离散元模拟, 并与有限元数值结果及试验结果进行对比验证. 计算表明, 考虑接触点处等效曲率半径的超二次曲面非线性接触模型可准确地计算单元间的接触碰撞作用, 并合理地反映非球形颗粒体系的运动规律. 在此基础上进一步分析了不同长宽比和表面尖锐度对卸料过程中颗粒流动特性的影响, 为非球形颗粒材料的流动特性分析提供了一种有效的离散元方法.